Customization: | Available |
---|---|
Rolling Element: | Single Row |
Structure: | To The Heart |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Rod ends consist of an eye-shaped head with integral shank which forms a housing for a standard spherical plain bearing. As a rule, rod ends are available with left or right-hand female (internal) or male (external) threads to ISO 965/1:1980. Where rod ends are needed for specific applications - primarily those where a rod end is attached to the end of a piston rod or at the base of a hydraulic cylinder - rod ends are available with slotted shank and compressible threaded section or with a "welding shank" i.e. a shank suitable for welding to another component.
TIK rod ends which require maintenance are available as standard with the sliding contact surface combinations steel-on-steel and steel-on-bronze. Both types of rod end require regular relubrication. Steel-on-steel rod ends have sliding contact surfaces which are hardened, phosphated and treated with a running-in lubricant. They are very resistant to wear and therefore particularly suitable for applications where heavy loads of alternating direction have to be accommodated. Steel-on-bronze rod ends have a hardened and chromium plated inner ring and a bronze outer ring. Their performance under conditions of lubricant starvation is therefore very good. TIK maintenance-free rod ends have special sliding layers of modern dry sliding materials characterised by low friction. They find application above all where long service lives are required without maintenance. Primarily, however, they are intended for applications where the load acts in a constant direction.
Bearing No. | Boundary dimensions mm | Load ratings kN | Mass | ||||||||||||||||
d | B | dK | C1 | d2 | G | h1 | l3 | l4 | l5 | l7 | W | d3 | d4 | rs | α˚ | Dynamic | Static | Kg | |
max | 6H | min | min | ≈ | |||||||||||||||
PHS 5 | 5 | 8 | 11 | 6 | 16 | M5 | 27 | 14 | 35 | 4 | 8 | 9 | 9 | 11 | 0.3 | 13 | 3.3 | 4.1 | 0.016 |
PHS 6 | 6 | 9 | 13 | 6.8 | 18 | M6 | 30 | 14 | 39 | 5 | 9 | 11 | 10 | 13 | 0.3 | 13 | 4.3 | 5.3 | 0.026 |
PHS 8 | 8 | 12 | 16 | 9 | 22 | M8 | 36 | 17 | 47 | 5 | 11 | 14 | 13 | 16 | 0.3 | 14 | 6.8 | 8.5 | 0.044 |
PHS 10 | 10 | 14 | 19 | 11 | 26 | M10 | 43 | 21 | 56 | 6.5 | 13 | 17 | 15 | 19 | 0.3 | 14 | 10 | 11 | 0.072 |
PHS 12 | 12 | 16 | 22 | 12 | 30 | M12 | 50 | 24 | 65 | 6.5 | 15 | 19 | 18 | 22 | 0.3 | 13 | 13 | 14 | 0.108 |
PHS 14 | 14 | 19 | 25 | 14 | 34 | M14 | 57 | 27 | 74 | 8 | 16 | 22 | 20 | 25 | 0.3 | 16 | 17 | 20 | 0.161 |
PHS 16 | 16 | 21 | 29 | 15 | 38 | M16 | 64 | 33 | 83 | 8 | 18 | 22 | 22 | 27 | 0.3 | 15 | 21 | 25 | 0.225 |
PHS 18 | 18 | 23 | 32 | 17 | 42 | M18×1.5 | 71 | 36 | 92 | 10 | 20 | 27 | 25 | 31 | 0.6 | 15 | 26 | 30 | 0.295 |
PHS 20 | 20 | 25 | 35 | 18 | 46 | M20×1.5 | 77 | 40 | 100 | 10 | 22 | 30 | 28 | 34 | 0.6 | 15 | 31 | 35 | 0.382 |
PHS 22 | 22 | 28 | 38 | 20 | 50 | M22×1.5 | 84 | 43 | 109 | 12 | 23 | 32 | 30 | 37 | 0.6 | 15 | 38 | 43 | 0.488 |
PHS 25 | 25 | 31 | 43 | 22 | 60 | M24×2 | 94 | 48 | 124 | 12 | 30 | 36 | 34 | 42 | 0.6 | 15 | 47 | 65 | 0.749 |
PHS 28 | 28 | 35 | 48 | 25 | 66 | M27×2 | 103 | 53 | 136 | 12 | 33 | 41 | 37 | 46 | 0.6 | 15 | 59 | 77 | 0.949 |
PHS 30 | 30 | 37 | 51 | 25 | 70 | M30×2 | 110 | 56 | 145 | 15 | 34 | 41 | 40 | 50 | 0.6 | 17 | 63 | 86 | 1.13 |